No-one is going to comment on the outlet being installed upside down?
Pretty common to see if you are in the US at least, builders tend to install a plug backwards if it’s operated by a light switch. Not code or anything, just something they do.
FYI: there’s a faction of people who believe this orientation is safer, given that the ground pin is on top (so if a plug is part-way out and something falls behind it, it’ll hit the harmless ground pin instead of the line).
Also FYI: anyone who doesn’t install it like it’s a little surprised face is insane and should be treated as such.
Regardless of the reason and whether it’s justified, this is code for US hospitals, or so I’ve been told.
All the outlets in our house were installed upside down, off it wasn’t for bulky transformers that plug directly in & chunky plugs which now have the wire going out upwards, I’m sure it would be a sensible and slightly safer way to do outlets
But bulky transformers are a thing, so there’s that. In any case, what would make the ground on top “slightly safer”?
If the plug is loose and you grab and yank it, there’s no risk of touching the hot, and the ground won’t hurt you. Also, with ground side down, loose outlets expose the hot connection when gravity pulls it down, while this doesn’t happen in the ground up orientation.
If something conductive falls onto the contacts, it’s not bridging anything.
Technology Connections did an episode about why some plugs have holes in the flats. I believe he briefly covered this topic in that video.
You know its good satire when you gotta think for a minute about whether this was serious or not.
Well if it was real they would have realized the mistake the moment they plugged it in. Since it’s plugged in for the picture, we know they are doing satire
Electricity flows over metal, not through it. As long as there’s an insulator on top, there shouldn’t be an issue.
Would I try it? No.
Could it work? Yes.
Why are all the wires full of expensive metal if we only need the surface?
Electrical engineer here. You’re mostly right–electricity does mostly flow on the outside of a conductor (a small amount does flow through the core).
But based on this picture, I don’t see an insulator on the hanger wire. Which means it’ll trip a breaker or blow a fuse as soon as you plug it in. And if it’s at your crazy uncle Ned’s house, where he casually replaces his fuses with pennies, you’ll get some visitors in a fancy truck!
I assume the metal hanger is aluminium. Unless you competely cover the metal in an insulator at the outlet legs then this will short and trip a fuse the second it is plugged in.
Electricity flows over metal, not through it.
I don’t think that’s true, but I don’t know enough about electricity to refute it. electromagnetism, sure, but as long as the metal loops around it’ll pull in the electricity (I believe).
Bismuth or Tungsten are very low in electrical conductivity. Coat them in clear rubber and it should be a long while before there’s a short.
Honestly, if it was plastic & around the block instead of the outlet, then that’ll be a pretty good idea. Plus, we have 3-D printers, so it should be easy
Harvard referring to the Harvard hospital, of course.
That’s the joke in the title.
Damn. And I thought I was so clever…
Notice how this pic was taken with flash
one of the dumbest thing i’ve ever seen
I have to know whether this is a joke or not
It is a joke
Thank you, I’m choosing to believe you for my sanity
The left picture would’ve burned down the house otherwise
Isn’t the socket turned off?
Didn’t even notice that, in my country that doesn’t exist
Hahaha not funny
Every time I see US sockets, I get the heebie jeebies. Or any non-recessed socket really, but at least most add insulation to the base of the prongs. No such luck here.
Meh, that’s only going to “coulda killed you”. The one piece metal wire will create a dead short across the circuit and trip it out instantly. He IS going to need new underwear and possibly pants also. He’ll have some scorched fingers with maybe a bit of temporary tingling in them after pissing off the angry pixies. But as far as death goes, god would need to be looking down directly at him and go “Fuck this guy, right now”. Not impossible, but it would require an exceptional amount of bad luck.
US outlets are safe. Not only does this out show a bit of recess at the surface, but the metal contacts that are carrying the current are also recessed inside about 1/8"/3mm where you can’t see them.
I dropped a penny into the gap between the plug and the socket when I was a toddler. The sparks were FANTASTIC, and long lasting, like a sparkler shooting up the wall.
My dad tried to remove the penny with his metal pliers, my mom stopped him before he killed himself. She yanked the cord and it stopped.
We saved the penny for awhile, might still be somewhere. It burned two trenches in the penny, it almost made it all the way through.
Lessons were learned.
What are you comparing this to? Same in Japan.
Japanese outlets don’t even have a ground pin, only live and neutral. While that’s not a problem on low-voltage or plastic devices, it can be shockingly (haha) dangerous in combination with metal casings.
Same in Switzerland, the non-recessed ones mustn’t be installed anymore. But just in case devices are plugged into flat ones you also get isolation on the non-earth pins on the new cables
Probably European Schuko and British outlets, they are WAY better.
I think schuko is much more likely the British ones are not recessed
Yeah, I forgot, thanks for the correction.
Oh hey it’s a felony tube.
Seems more like a fash light shape
I don’t get it
pipe bomb
“Harry I’ve found the source of ticking sound”
Toothbrush
Hand warmer.
Reminds me of the movie where the protagonist Johnny 5 exclaims, “Number 5 is alive!”
Literally the only good thing that could be said about this is that it’s on a brick wall. Otherwise that’s now the 3rd most dangerous electrical outlet I’ve ever seen.
How so? This one instantly trips a circuit breaker and then is quite safe. Now if the two hooks were separate, ir’d be a whole different matter…
Which ones are first and second?
2nd worst: at my friend’s last place the microwave mounted over the stove fell out and he had me come look and fix it and I discovered that the outlet that powered the microwave was strapped to the gas line. No box, just the wires out the end of the conduit wired into the outlet there inside the wall. I told him to get an electrician, I was not touching that shit.
1st worst: basically looked like this.
Wow. You’ve seen things.
I was hoping for an unusual cause of demise on that plaque. Sometimes old gravestones list a cause of death with wry humor.
I imagine there could be a lot of gravestones that just read “engineering”
Shocking if true
goddammit heres an upvote
